Cushion Foam Insertion Guide
Please complete the following steps in order, to ensure a flawless finish:
1. Prepare the Cover
Take care to fully unzip the cushion cover, for maximum opening.
2. Align the Foam Inner With the Cushion Cover
Before inserting, carefully match the foam insert to the cover:
Ensure the length and depth of the foam corresponds with the length and depth of the cover.
If your set includes an inner liner with zipper, align this with the cover's zipper.
Covers and inners supplied by Ikira, will have zippers that naturally align.
3. Insert the Foam Inner With Care
Fold the foam insert in half by bringing the left and right edges together.
Maintain the alignment from Step 2 and begin inserting the foam into the cushion cover.
Always compress the foam rather than pulling on the cover fabric, as pulling may damage
zipper teeth, stitching, or fabric.
When folded correctly, the cover should glide smoothly over the foam.
4. Position the Insert
With the foam still folded, gently pull the cover over the insert, as far as possible.
Gently release the foam and allow it to expand into position.
[For removal, simply reverse this folding technique]
Remember to always compress the foam insert fully and minimise pressure on the cushion cover.
5. Align the Corners
Gently guide the foam insert so all eight corners (on square and rectangular cushions) fit
snugly into the cover's corners.
Carefully push the foam into place until it rests firmly against the side furthest from the zipper.
Work methodically around each corner to ensure perfect alignment.
6. Final Alignment
Check that the edges of the foam align with the seams of the cushion cover.
If needed, gently adjust the cover fabric until they are as straight as possible.
7. Professional Seam Finishing
Inside the cover:
Run your fingertips along each interior seam.
Uniformly push the seam allowances downward.
Flip the cushion and repeat until all seams lie flat against the gusset or border of the cushion.
8. Quality Inspection
Examine the cushion for any wrinkles.
If the inner lining is wrinkling under the cushion cover, gently smooth excess lining toward the zippered gusset.
Neatly tuck beneath the zipper for concealment.
9. Close the Zipper
Use one hand to gently compress the foam insert, keeping it clear of the zipper teeth.
Gently slide the zipper closed in small, controlled increments.
Maintain consistent pressure to prevent any foam, lining, or threads from nearing the zipper's teeth.
As you progress, ensure the gusset seams remain flat and aligned with the seams flattened in step 7.
IMPORTANT: Never force the zipper if resistance occurs. A caught thread can jam the slider mechanism or damage the zipper teeth.
Finishing
Touches & Care
Once the cushion has been stuffed, lightly steam or iron the cover using a cool iron set to the synthetic fabric setting. Glide the iron smoothly over any creases, taking care not to linger in one spot, as prolonged heat can scorch the fabric.
Gently remove any lint using a lint roller or the upholstery attachment of your vacuum cleaner. Carefully trim any loose threads using a sharp pair of scissors. Do not pull on them to break them as this may damage the fabric.
These final refinements will ensure your Ikira cushions maintain their impeccably tailored appearance for years to come.
A Note From Kari
At Ikira, we pride ourselves on our luxurious bespoke soft furnishings that we tailor to perfection.
With a keen eye for detail, 25 years of experience, personalised service and expert advice - it would
be remiss of me not to let you in on these insider secrets.
Because when it comes to stuffing cushions, some things are really worth noting.
The process is quite simple.
Ensure the area you intend stuffing your cushions in is clean and free from dirt and dust.
But if, despite your best intentions, there are spills
- please refer to our handy cleaning guide.
